There was a point in time when we decided to remain unconcerned about getting a voltage stabilizer for our homes or offices. Similar to when a household was considered very wealthy just because it contains a washing machine, an AC, and a microwave.
But these are not those sorts of times, and appliances that used to be markers of wealth are now an essential part of everyday life.
Life’s inclusion of numerous appliances and widgets has also meant that their protection became a priority. This is where stabilizers came into play, an appliance that protects your home and gadgets from circuit overload.
This is where Daikcell also became a household name, a genius of great craftsmanship and customer satisfaction for their good stabilizers.
But did you know that all stabilizers, Daikcell included, need to be plugged into a socket in order to work? They are not stand-alone devices that can run autonomously once plugged into a power socket.
So, how does a Daikcell stabilizer function and how many kilowatts does it use in a month? That is the question.
How Does a Daikcell Stabilizer Work?
Stabilizers like Daikcell use transformers and circuitry to mitigate voltage fluctuations by continually adjusting the output.
What this means is that if the input voltage is low, which may lead to an appliance not operating properly, a stabilizer will increase the power to raise the output and assist the appliance.
Similarly, if the input voltage is high which may cause damage to an appliance of higher value, the stabilizer will change the power and reduce the output to defend your appliances.
A Daikcell stabilizer constantly boosts and modifies power, and this ongoing effort requires the stabilizer to use some electricity to continue functioning to keep performing optimally. It is minimal to other appliances, but this does add to your electricity usage.
Understanding Electricity Consumption
To figure out how many units of power monthly Daikcell stabilizer uses, we first need to understand how power usage is measured. One unit (kilowatt/hour) is the amount of power used by a device with a power usage of 1,000 watts in 1 hour.
For Daikcell stabilizers, power usage is around 2-15 watts/hour, depending on size, the device’s support capacity, and what device it is. To illustrate with an example, let’s assume that there is a Daikcell Mainline Stabilizer with a capacity of 5 KVA. This means it would cost around 10-12 watts.
So if the stabilizer uses 10 watts of power 24 hours a day, then it uses: 10 watts * 24 hours = 240 watts/hour = 0.24 KWh over an hour.
In a month with 30 days, that would be: 0.24 KWh * 30 days = 7.2 KWh. This means 7.2 units in a month.
This is to say that Daikcell stabilizers, on average, only complete a fraction of a unit.
Daikcell Energy Consumption Ranges
We have already established that Daikcell stabilizers are easy on your electricity bill. And any other stabilizer that is as good in performance and its commitment towards it customers as Daikcell is will be the same.
So are all Daikcell stabilizers the same? Do they all consume the same amount of energy?
No, they do not. Based on their KVA, it is generally easy to tell that when a stabilizer’s capacity increases and it is made to safeguard heavier appliances, the energy required to operate it also increases.
Daikcell stabilizers have 2 types of levels of energy consumption:
If your Mainline or Multipurpose stabilizer is up to 5 KVA, it consumes 10 to 12 Watts of electricity.
If your stabilizer is over 5 KVA then it consumes 15 watts of electricity.
Either way, there is no chance that your Daikcell stabilizer for ac will consume more than 10 to 12 units of energy in an entire month, assuming it runs for 24 hours a day. Which is pretty insignificant compared to what an AC would consume within just a few hours of being in operation.
Cost Implications
At Daikcell, you will never burn a hole in your pocket if you buy a stabilizer from us. With that said, let us outline the potential expenditure incurred from a stabilizer that runs on power for 24 hours a day for 30 days in a month.
If the average unit cost for electricity is Rs. 6/unit, for instance, if your Daikcell stabilizer uses up 7.2 units in a month, you will most likely end up paying Rs. 80 for any Daikcell stabilizer.
If it is below 5 KVA, it will cost you about Rs. 60. If it is more than 5 KVA, it will cost you a maximum Rs. 70.
Finally, Daikcell stabilizer uses a tiny amount of units a month, which is almost nothing when you consider the work it does for you, safeguarding your home and valuable appliances from dangerous and unsightly voltage fluctuations.
